Perndorfer :: Wasserstrahl-Schneiden - Wasserstrahlschneide Anlagen & Maschinen

2D cutting

2D Cutting

Gantry construction 2D

Cantilever construction 2D

The Performance Package

With a huge cutting bed, the gantry- system enables the user to cut large parts accurately and by adding several standard size sheets to the table the machine can run efficiently for long periods with minimal intervention.

The All-round Solution

With a high quality rigid construction the cantilever-system sets the standard for accurate quality cutting and enhanced performance. The reduced floor space to sheet size ratio combined with excellent open construction for ease of loading/unloading make the cantilever-system a leader in its class.

gantry-systems are avaiable with following bedsizes:*		cantilever systems are avaiable with following bedsizes:*
4000 mm x 3000 mm		2000 mm x 1000 mm
6000 mm x 3000 mm		2500 mm x 1250 mm
6000 mm x 4000 mm		3000 mm x 2000 mm
8000 mm x 3000 mm		4000 mm x 2000 mm
8000 mm x 4000 mm		6000 mm x 2000 mm
		9000 mm x 2000 mm

* customized bedsizes are also avaiable on request

Components & Options

	Bevel reduction By analysing the contours of the part using special software, a square cut is achievable. This feature also enables the user to cut bevels up to 10°.
	Abrasive System The intelligent and infinitely variable Abrasive delivery system enables the user to control precisely the quantity of Abrasive used during the cutting process. Should the machine run out of abrasive or have a blckage the machine automatically recognises this and reports it accordingly.
	Abrasiv-mud and setting off system For the continuous cleaning of the water tank a screw conveyor is installed at the soil of the basin. This promotes the setting off abrasivmaterial at the front side from the basin to a receptacle outside of the plant. For the protection of the screw conveyor from small rest material (danger from blocking) an additional partial catch lattice over the scratching promoter is attached. The cyclic duration of the screw conveyor is stopped over the PC control.
	Lifting device Chain hoists for loads up to 1 ton.
	automatic abrasiv feeder The suction lance of the conveyor is put into the BIGBAG beside. The bicameral system guarantees the continous flow of the sand. The throughput is continously controlled. This system is a safety and easy option to your waterjet machine.
	High pressure pump The system-controlled, infinitely variable high-pressure pump is available, depending upon performance requirement, from 10 kW to 100 kW and directly integrable into the machine.
	height sensor controlling of the Z-axis protection to collision the height-sensor guarantees a constant distance between focusing tube and material surface in the total working-area the heightsensor reacts also to obstructions in cutting direction and protects to collision (cut parts can tilt).
	drilling-unit materials like GFK and sandwich-materials can delaminate when the water beam penetrates in the material for these materials it is necessary to make a starting-hole with the drilling-unit the water beam can go through the material and start with the cutting-process.